View EMP215_4666241.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

EMP215
UPDATED 05/08/2008
12.5 - 16.5 GHz Power Amplifier MMIC
FEATURES
* * * * * * 12.5 - 16.5 GHz Operating Frequency Range 24.0dBm Output Power at 1dB Compression 17.0 dB Typical Small Signal Gain -40dBc OIMD3 @Each Tone Pout 14dBm
Dimension: 2250um X 1000um Thickness: 75um 13um
APPLICATIONS
Point-to-point and point-to-multipoint radio Military Radar Systems
Caution! ESD sensitive device.
ELECTRICAL CHARACTERISTICS (Ta = 25 C, 50 ohm, VDD=7V, IDQ=190mA)
SYMBOL F P1dB Gss OIMD3 Input RL Output RL Idss VDD Rth Tb PARAMETER/TEST CONDITIONS Operating Frequency Range Output Power at 1dB Gain Compression Small Signal Gain Output 3rd Order Intermodulation Distortion @f=10MHz, Each Tone Pout 14dBm Input Return Loss Output Return Loss Saturate Drain Current Power Supply Voltage Thermal Resistance (Au-Sn Eutectic Attach) Operating Base Plate Temperature -35 VDS =3V, VGS =0V 211 MIN 12.5 22.5 15.0 24.0 17.0 -40 -10 -10 264 7 34 +85 -37 -6 -6 317 8
o
TYP
MAX 16.5
UNITS GHz dBm dB dBc dB dB mA V C/W C
ABSOLUTE MAXIMUM RATINGS FOR CONTINUOUS OPERATION1,2
SYMBOL VDS VGS IDD IGSF PIN TCH TSTG PT CHARACTERISTIC Drain to Source Voltage Gate to Source Voltage Drain Current Forward Gate Current Input Power Channel Temperature Storage Temperature Total Power Dissipation VALUE 8V -4 V Idss 4mA @ 3dB compression 150C -65/150C 3.4W
1. Operating the device beyond any of the above rating may result in permanent damage. 2. Bias conditions must also satisfy the following equation VDS*IDS < (TCH -THS)/RTH; where THS = ambient temperature
Specifications are subject to change without notice. Excelics Semiconductor, Inc. 310 De Guigne Drive, Sunnyvale, CA 94085 Phone: 408-737-1711 Fax: 408-737-1868 Web: www.excelics.com
page 1 of 3 Revised May 2008
EMP215
UPDATED 05/08/2008
12.5 - 16.5 GHz Power Amplifier MMIC
ASSEMBLY DRAWING
The length of RF wires should be as short as possible. Use at least two wires between RF pad and 50 ohm line and separate the wires to minimize the mutual inductance.
CHIP OUTLINE
Specifications are subject to change without notice. Excelics Semiconductor, Inc. 310 De Guigne Drive, Sunnyvale, CA 94085 Phone: 408-737-1711 Fax: 408-737-1868 Web: www.excelics.com
page 2 of 3 Revised May 2008
EMP215
UPDATED 05/08/2008
12.5 - 16.5 GHz Power Amplifier MMIC
DISCLAIMER EXCELICS SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. EXCELICS DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN. LIFE SUPPORT POLICY EXCELICS SEMICONDUCTOR PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF EXCELICS SEMICONDUCTOR, INC. AS HERE IN: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.
Specifications are subject to change without notice. Excelics Semiconductor, Inc. 310 De Guigne Drive, Sunnyvale, CA 94085 Phone: 408-737-1711 Fax: 408-737-1868 Web: www.excelics.com
page 3 of 3 Revised May 2008

▲Up To Search▲

Price & Availability of EMP215

	To Download EMP215 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .